Pond De-Icers

Easy to use; Just plug in your Floating De-Icer and float it on your pond dome side up. If your pond is already ice covered, drill a hole with an ice auger and place the Floating De-Icer over the hole. If the ice is only 1 or 2 inches thick, place the Floating Deicer on the ice and it will melt its way through. Do not chop through the ice in smaller ponds as the shock waves can damage or kill your fish. "Always keep safety your number one priority." Never walk on thin ice. Try to position your Floating deicer within arm's reach or shore to avoid walking on thin ice.* Floating De-Icers are recommended for ponds up to 600 gallons. Please use two Floating De-Icers for ponds over 600 gallons or for ponds requiring extra gas exchange due to excessive plant decay or large quantities of fish under the ice. * Full Manufacturers Instructions should be followed. This unit should be plugged into a GFCI outlet or device for safety. Note: * The Floating Deicer is not designed to heat the water.  Only to allow harmful gases to escape from below the ice covering.  These gases come from decaying organic matter in the pond.  IE: Leaves, fish poop, dead plants & other aquatic life.  It is always best to remove as much debris as possible before the pond ices over.