- Commercial Flagpoles

Outdoor Commercial Flagpoles GENERAL INFORMATION FOR ALUMINUM FLAGPOLESOur cone tapered ground set aluminum flagpoles are precision fabricated from new, 6063-T6 tubing utilizing the industry’s most sophisticated, state-of-the-art manufacturing processes. The conical portion tapers approximately 1” in every 51/2 feet. Poles with overall lengths of less than 38’6” are shipped in one piece. Longer lengths are shipped in sections and will be factory fitted with a self-aligning sleeve which requires no field welding. Upon proper assembly a hair-line joint will occur. All poles are double spiral wrapped with protective paper and shipped in a hard fiber tube. “Warning” The flagpole shaft will stain if allowed to remain in contact with wet or damp wrappings. If there is any sign that the shaft or its shipping tube has come in contact with water during shipment, remove it from the tube and unwrap immediately. If the shaft is to be stored outdoors, it must be stored unwrapped, and off the ground. If the shaft is to be stored indoors, it may be left in the wrappings and the tube, provided that it shows no sign of having been exposed to moisture, and that it will not be exposed to moisture during storage. All foundation dimensions listed in this catalog are intended for general guidelines only in good, firm, dry soil. It is recommended to consult and engineer for specific foundation dimensions suited to your exact location. “Warning” - Extreme care must be exercised when installing flagpoles near overhead power lines or when digging in the vicinity of buried cable or piping. Contact your local authorities before any digging.