Motorsport Tow Strap

This is the factory BMW Motorsport tow strap.  Unlike the steel factory tow hooks, this strap does not protrude from the bodywork, making it a safer alternative.  Additionally, it remains tucked away except when in use for a very clean look.  Requires cutting a small slot in plastic bumper for clean installation.  Recommended for plastic bumper cars.

INSTRUCTIONS
Cut a slot in the front bumper plastic (VERY IMPORTANT) right at the height of the bottom edge of the bumper support.  Undo the two bolts holding the bumper on (you may have additional fasteners for plastic wheelwell covers and other small parts) and remove bumper.  Slide the non-foam end of the strap in and as you reattach the bumper, loop it around the bumper shock.  The bumper shock/support will have the pulling stress when the strap is used and the bumper support will keep the plastic cover from ripping - assuming your notch is right at the correct level mentioned above.