E36/Z3 (-1999) Lightweight Sprung-Hub Clutch/Flywheel Kit
Price
$849.99
Summary
Sprung-hub design prevents chatter, race proven performance and durability
Buy OnlineDetails
Finally! A proper solution for a low cost, low hassle, lightweight, sprung hub clutch to reduce transmission noise in your E36 and Z3 car. Our kit features JB Racing flywheels and either a Sachs or ClutchMasters clutch package - some of the best names in the business.
These lightweight aluminum flywheels significantly lower the high rotating mass of your stock flywheel, allowing your engine to rev quicker. Makes shifting faster and rev-matching much easier. The addition of a sprung-hub clutch will reduce noise normally masked by the heavy stock dual-mass flywheel, which is more prevalent with a lightweight piece. Other M5 pressure plate kits on the market boast a lighter flywheel, but our total package is 1.5 pounds lighter, which means more power to the wheels!
THE FLYWHEEL
JB Racing is one of the best machine shops in the country, used by many professional race teams to do precision machining for engines and other driveline components. Their BMW flywheels are made with the same precision and quality that these teams (including the BimmerWorld World Challenge Touring Cars) rely on, unlike typical units on the market. Standard features include:
- CNC machined flywheel, zero-balanced to eliminate vibration
- Replaceable hardened steel clutch surface, bolted - not riveted on
- Heli-coil inserts for pressure plate don't strip when clutch is replaced
- Factory starter ring gear
- Hardened steel gaul plate keeps the flywheel bolts from damaging flywheel
- Flywheel bolts, pressure plate bolts, and dowel pins included
THE CLUTCH
This JB Racing lightweight flywheel accepts a variety of stock and performance clutch packages. Our design addresses several concerns common to both street and track driven cars:
- Sprung hub - By adding a sprung hub disc, chatter and noise gained by adding a lightweight flywheel is greatly reduced or eliminated.
- Disc material - Depending on your car's use, we offer five flavors for the right amount of grip:
- Sachs OEM Spec - smooth OEM feel, M3 spec clampload
- ClutchMasters Stage I - Performance Organic - 40% higher holding capacity, excellent for street and track use
- ClutchMasters Stage II - Kevlar - 70% higher capacity, smooth engagement, very long hard-use lifespan (2-3 times stock)
- ClutchMasters Stage III - Sintered Kevlar - segmented Kevlar surface, more bite, 110% higher capacity, long life
- ClutchMasters Stage IV - Ceramic - hard use compound, gives up some smoothness for additional power handling capability - great for track use and hard street
- Pressure plate (ClutchMasters units only) - We increase the clamping force on the pressure plate by changing the lever action, which adds a minimal amount of pedal stiffness compared to other methods. We also replace the straps with beefier pieces and add an additional layer for good measure - this has proven to be the Achille's heel most pressure plates and is a must for cars that will receive any extended hard use.
All kits include JB Racing aluminum lightweight flywheel, clutch disc and pressure plate of choice, and throw-out bearing. Fits all 6 cylinder E36 (323, 325, 328, M3), and -99 Z3 (2.8L, M Coupe/Roadster).
NOTE: Large 420G 6-speed transmission conversions are inherently noisy. While this noise can be reduced with a spring hub clutch, it cannot be eliminated.
INSTALL NOTE: Install all discs with springs facing flywheel.