BimmerWorld E46 M3 Carbon Splitter/Undertray

The BimmerWorld E46 M3 Carbon Splitter/Undertray was created to balance the huge downforce levels generated, even at low speeds, from our Carbon Race Wing.  This splitter is intended as a track/race part and reduces ground clearance - not suggested for street use.  Our kit is complete, but replacement parts are available separately for damage replacement.

• Effective - This splitter maximizes the surface area allowed by BMW Race rules (with an optimized front track width).  Maximum extension provides high levels of downforce, while a fully enclosed undertray maximizes efficiency by smoothing air under the car as far back as possible.
• Lightweight - This carbon unit with hardware weighs in at about 8# complete.  Reducing weight in front of the front tires has a huge affect on handling.
• Durable - Made to lower the front of the car about 1.5", this splitter is a good compromise between functionality and form.  This height typically withstands off-track excursions without major damage.  Additionally, due to the standoff mounting, a damaged undertray will not typically take your entire bumper with it, confining most repairs to the undertray itself.
• High Quality - The undertray is constructed as a honeycomb core composite by a manufacturer rooted in ALMS, Rolex, and other race parts.  These parts will take a beating!
• Damage Replacement - In the event of damage, this piece can be potentially repaired (send picture for quote). 
  

This kit consists of a durable honeycomb-core carbon undertray, carbon riser/bumper extension, and standoffs.  Welding required to support the rear of the undertray.  Light fabrication required to mount splitter standoffs.  Cars produced before 11/01 do not have the carbon front bumper support, and require a different style standoff indicated with the checkbox below.  Fits E46 M3 cars only. 

Some pictures include optional dive planes.

Made in USA